Scroll down to see entire project below

46 inch flat panel LCD mounted to a brick gas fireplace on a tilt mount. All cabling and wires are concealed in wire mold. Components are sitting on a Sanus single tray glass mounted shelf beneath the TV. Install also includes a 5.1 surround sound system. TV and all components are connected to a Panamax surge protector behind subwoofer on the left near the floor.

Close up view of Flat screen and surround sound system mounted over fireplace in Living Room.

Closer view of Flat screen and surround sound system with components mounted over fireplace in Living Room.

In the lower left corner of this picture is the Panamax surge protector, the subwoofer and the white wire mold that will be painted to match the brick.

Here is a close up picture of the TV and the front right speaker.

The center speaker is also mounted directly to the brick wall above the fireplace beneath the TV. Beneath that is mounted a Sanus single tray glass shelf which is holding the cable box and DVD/amplifier combo.

Here is a left side view of the TV and front left speaker. Behind the TV you can also see the HDMI cables which are not visible from the front view.

With a closer view of the front right speaker you are able to see how we ran the speaker wire which is hard to see with the naked eye when you're in the room.

With a closer view of the front left speaker you are able to see how we ran the speaker wire which is hard to see with the naked eye when in actually the room.

The left surround speaker wire is run along the floor and up the stand to the speaker.

To conceal the speaker wires the right surround speaker is run through the wire mold into the wall floor molding and up the speaker stand to the speaker.

Straight on view of the single glass Sanus shelf. Mounted a few inches above the brick fireplace.

Right view of the single glass shelf Sanus mount. Mounted a few inches above the brick fireplace.